is a used KD Scientific KDS210 laboratory syringe pump. It can hold up
to two syringes, and
both infusion and withdrawal capabilities.
Our price: $1400
seen in the pictures, cosmetic condition of this pump
is not pristine, but is quite good. It bears a few small
dings, scrapes, and stains.
functionality has been tested, and appears to be fine. A test was
carried out using the method suggested in the technical section of the
KDS site, and the pump performed as expected - measured linear travel
and delivery time were correct for selected combination of syringe
diameter, delivery rate, and delivery volume. The pump was also
operated in continuous infusion/withdrawal mode for several hours
across nearly the entire range of travel - no problems.
pump is straightforward to use, yet rich in features:
Scientific model KDS210
hold up to two syringes
and withdrawal capabilities
VAC, 50/60 Hz operation
mains cord (not shown) will be included.
- This is a
laboratory syringe pump - not a medical device - not manufactured or
sold for in vivo human use.
can be found at the KD Scientific web site (look for model
can also find the manual (.PDF format) for the 200 series pumps there.
If you are interested in this and have any difficulty
locating this information, then please contact us; we'd be happy to
lookup tables for many common series of syringes (manual setting of
plunger diameter is also available)
modes of operation (infusion, withdrawal, infusion-then-withdrawal,
withdrawal-then-infusion, or continuous I/W)
rate and volume settings for infusion and withdrawal
and rate may be changed "on the fly" during operation
"fast forward" and "fast reverse" capability
mechanism for locking/unlocking the drive block from the leadscrew
range of speeds to allow a wide range of flow rates for any given
on any picture below to view a larger, higher-resolution version (in
new window or tab, depending on your browser).